Opening measured
Every leaf fits the real front rather than a standard size.
Designed for the way you live
Replacement wardrobe doors in Marbella
We can assist you inEspañolEnglishDeutschРусский
Replacing the front can refresh a wardrobe that still works. Before choosing mirror, lacquer or oak, we check the frame, alignment and hardware: a new door cannot repair a warped cabinet.
- The spaceA front-facing photo
- DimensionsWidth, height, depth
- StorageWhat it needs to hold
Designed for your space
Keep the cabinet and renew the visible face
The cabinet condition decides whether new doors are a sound investment. Fine lacquer will not compensate for hinges fixed into damaged board.
Movement chosen
Hinged and sliding options are compared with available passage.
Samples alongside
Timber or lacquer is viewed with retained floors and furniture.
Scope clear
Doors, hardware and optional interior work are listed separately.
From enquiry to installation
How we work in Marbella
Each decision is confirmed before the furniture goes into production.
- 01Initial price guidance from photos and rough dimensions
- 02On-site measurement and access check
- 03Design if needed; free when you order manufacture
- 04Final itemised quotation
- 05Deposit after approval
- 06Made-to-measure production
- 07Delivery and installation
- 08Final check together
Your project starts here
A clearer direction for a home that feels yours.
I'm Alba Cano. Share the interiors or details you like. I'll help you connect style, proportions and everyday use, keeping your priorities at the centre of the furniture brief.
No obligation. Rough measurements are enough to get started.
Capacity you can check
What to inspect before ordering doors
Four checks on the existing wardrobe determine the sensible extent of work.
Board that holds
A new hinge needs sound material for its screws.
Each opening measured
Apparently identical doors may have different widths or diagonals.
Right movement
Sliding and hinged doors use room in different ways.
A finished perimeter
Visible sides and plinth belong to the front too.
Three situations
Three possible findings
Inspection may support door replacement, require new tracks or show that the cabinet needs rebuilding.
Scenario 01 · Marbella Este
New doors while retaining a useful interior
A sound interior stays. We change the leaves and necessary fittings, then agree the exposed edges.
- Starting point
- Edges and fixings are inspected rather than assuming hidden material is sound.
- Decision
- Every leaf is measured for its own opening and movement.
- Before manufacture
- Samples are viewed beside retained floor, walls and furniture.
Scenario 02 · Marbella Oeste
Mechanism and panels replaced as one system
If sliding doors rub, tracks are tested before new panels are ordered. Weight and profile must work together.
- Starting point
- We find the source of rubbing and check the track level.
- Decision
- Wheels, rails and panels are selected for the same load.
- Before manufacture
- Internal drawers must still clear the new overlap.
Scenario 03 · Nueva Andalucía
When new doors do not solve the problem
Swollen board or loose fixings shorten the life of new doors. We compare repair with a new cabinet.
- Starting point
- Moisture, distortion and weak fixings are photographed.
- Decision
- Cost and useful capacity of both options are compared.
- Before quotation
- The quote distinguishes retained pieces from removal.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Design ideas for replacement wardrobe doors
Sixteen configurations to explore layouts and finishes. These images are design references; completed work is shared in our Instagram feed above.
Matt-white fronts with black handlesMatt white is compared with existing light and black handles.
Pale-oak sliding wardrobe frontsAn oak slider needs its overlap and track defined.
Sage-green framed wardrobe frontsGreen framing follows each leaf’s real dimensions.
Mirrored fronts with bronze profilesMirror adds weight that the system must support.
Dark-walnut fluted wardrobe frontsWalnut slats require neat edge details.
Smoked-bronze glass wardrobe frontsBronze glass shows some contents depending on light.
White ventilated louvre frontsLouvres ventilate only if air can move behind them.
Ivory-and-oak combination frontsIvory and oak are viewed beside floor and wall.
Curved pale-ash wardrobe frontsA curved leaf requires compatible movement and space.
Graphite fronts fitted around a columnAround a column, every front is set out separately.
Accessible fronts with wide handlesWide handles go where users can reach them.
Oak wardrobe fronts with natural caneNatural mesh changes how the front is cleaned.
High-gloss cream wardrobe frontsHigh gloss reflects the room’s light and unevenness.
Linen-effect fronts with champagne profilesLinen texture is examined close to its champagne trim.
Blue-and-oak fronts for a child's roomIn a child’s room, edges and hardware face daily use.
White fronts integrated with wall mouldingsWhite mouldings must clear the door as it opens.
A useful comparison
Change doors or do more work
Support, movement and capacity make the decision before colour does.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Hinged leaves | Keep a solid cabinet | Hinges and front clearance |
| Sliding panels | Refresh usable rails | Weight, wheels and overlap |
| Track and panels | Address worn movement | Top and bottom fixing |
| Side cover strips | Finish exposed edges | Wall and ceiling junctions |
| New wardrobe | Resolve a poor structure | Final capacity and removal |
| Mirrored doors | Add reflection and use | Leaf load and safe fitting |
Written scope
What we measure and deliver
The scope follows an inspection of the cabinet, rather than a frontal photograph alone.
Existing support
Boards, fixings, base and damage are checked before promising doors only.
Each opening
Widths, heights and diagonals are recorded for individual leaves.
Full movement
Internal and external obstacles are tested with the proposed system.
Doors and finish
Core, edges, colour or veneer and handles are identified.
Hinges or rails
Hardware follows load and the available fixing material.
Fitting and adjustment
Leaves are aligned and every route tested at installation.
Painting, internal repair and cabinet replacement are expressly priced if needed.
Programme, cost and guarantee
Inspection before finish selection
Pricing changes when the cabinet needs repair, a different system is required or access dictates smaller panels.
Four milestones before handover
- 01Photos and priorities
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
- 02Verified opening
The room itself, opening, access and door movement are checked before the layout and elevation are approved.
- 03Production slot
Drawings, finishes, hardware, scope and written price proposal are accepted before fabrication is booked.
- 04Fitting and review
Delivery, protection, installation, adjustment and final review are coordinated in Marbella.
Where the investment changes
A damaged base must be repaired or replaced before new fronts are hung.
Height and width affect cutting and delivery.
Lacquer, veneer, mirror and glass involve different weight and processes.
Dismantling, new machining and regulation are stated separately.
Local context · Marbella
Measure the wardrobe where it stands
In Marbella, visits are arranged around the actual address and access. The neighbourhood never replaces inspection of the furniture.
Central apartment
Lift and stairs affect the size of panels that can be carried in.
Gated development
Material entry and permitted hours are confirmed beforehand.
Bright bedroom
Samples are judged beside windows and retained furniture.
Documented confidence
A traceable project from enquiry to handover
We publish how to contact us and when the team is available. Project-verified constraints in Marbella are recorded before manufacture.
After handover
Applicable coverage, duration, supplied components, fitting, care and exclusions appear in the accepted documents.
Languages
We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Marbella office by appointment.
Your point of contact
A project manager reviews the enquiry, requests any missing details and follows the work from measurement to final installation.
Project contact
Use the MMV Studio enquiry form and tell us your Marbella area or municipality. Legal business details are linked in the site notice.
Arranged visits
Before travelling we confirm the survey date, property address and access instructions with you.
The next step
Your idea, ready to explore.
Share your favourite references and the details that matter to you. We can review the scope together and separate the essentials from the options worth comparing.
Scope and terms are confirmed before you place an order.
Practical answers
Questions before replacing the fronts
Can new fronts fit any wardrobe?＋
Not always. Structure, alignment, hardware and opening space must be compatible. We will flag damaged cabinets before pricing doors alone.
Your project starts here
Send the details you have
Send cabinet-interior, track and hinge photographs, plus width and height of each opening. Say whether handles stay or the opening method changes.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar